27-1/4" V-Shaped Leg

This one-piece aluminum table leg has a unique mounting plate. Attaches to furniture by resting on a flange in back of the leg, allowing the beautiful profile to be fully visible from all angles.  The legs are very sturdy and can handle most furniture loads. Perfect for the designer as well as the homeowner, furniture maker, and hobbyists.

• Height: 28-1/4" (718mm) overall; 27-1/4" (692mm) from top of plate to bottom of leg
• Finishes: Brushed Aluminum, Polished Aluminum
• Material: Aluminum
• 200 lbs. vertical load rating per leg
• Mounting plate - Solid 1/2" thick aluminum, all part of the single cast leg
• Mounting plate dimension(s) - Five sided, varies from 3-1/2" to 4-1/4" wide x 4-1/2" deep to the "V"
• Sold as single leg

Mounting mechanism is a flange on the back of the leg; the furniture rests on this lip and is screwed on. The bottom of the "V" sits 3/8" above the mounting plate. The tallest part of the "winged-V" is 1-1/2" above the mounting plate. The "left" and "right" edge of the top of the leg are about 3-7/8" away from center.