TableLegsOnline

Our T516 is a 5-1/16" fastening T-Nut. Size: 5/16" Material: Steel Length: 7/16" Outer diameter: 7/8" Inner diameter: 5/16" Sold as single

Our T1420 is a 1/4" x 20 fastening T-Nut. Size: 1/4" x 20 Material: Steel Length: 5/16" Outer diameter: 3/4" Sold as single

Our A3100 is a M10 fastening T-Nut. Size: M10 Material: Steel Length: 7/16" Outer diameter: 1" Inner diameter: 1/2" Sold as single

This is a steel threaded M10 leveler with a plastic base. Thread size: M10 Height: 1-3/8" Diameter: 1-3/16" Sold as single

Specifically designed to conceal the floor mounting plates of our 2-3/8" diameter bolt down legs, the 304 grade stainless steel cover plates will give a sharp, crisp, decorative appeal to an...

Washer for installing casters to 60MM legs.  Provides support and distributes pressure from caster body to caster stem and leg structure. Size: 2-3/8" Material: Steel Inner...

These panel clips allow you to create your own modesty panels. Picture above shown using a white melamine board as the panel. For use with our 2-3/8" diameter legs Set of (4) per polybag

Our F3707 is a M10 threaded mounting plate used to attach hardware, such as table legs, levelers, or casters. Thread: M10 threaded Material: Zinc, plated with steel thread Finish: Zinc Size: 1-7/8"...

Our F4100 is a corner leg bracket designed to attach table legs to a frame with the ends of the brace set into grooves. The table leg is then secured using the center hole. Size: V-shaped 2-7/8" x...

The Linkit table top connector is used to connect table tops. This connector mounts to the underside of the table top and can be used with a wide variety of tables, for multiple sizes and...

Using two of our SL5250 Cast Iron T-shaped bases per table top, is a cost effective solution for supporting longer rectangular table tops. The two-prong design provides excellent support while...

Using two of our SL5370 Cast Iron ADA Compliant bases per table top, is a cost effective solution for supporting longer rectangular table tops. The two-prong design provides excellent support while...

Our 4" tall square leg is a great choice if you're looking for something bold and elegant for your setup. This leg is built to handle your heavy furniture or cabinets, and comes standard in a...

These square furniture legs adjust up to 1/2" and have a load rating of 200 lbs per leg.  The mounting plate screws to the leg from the top, then is screwed as a unit to the furniture from...

Our 16-1/2" tall tapered square wood coffee table leg offers stylish support for sofas, ottomans, kitchen cabinets and also serves as a great replacement leg. The A2106 furniture foot is offered in...

Our 14" tall wood coffee table leg offers stylish support for sofas, ottomans, and also serves as a great replacement leg. The TRA14 furniture foot is offered in unfinished alder wood. Each leg is...

The WAVE16 offers a unique "wave" design to tapered wood coffee table leg offers stylish. The WAVE16 comes in unfinished rubberwood, so that you can stain or paint to match your custom...

Our 21-1/4" tall tapered wood coffee table leg offers stylish support for sofas, ottomans, and also serves as a great replacement leg. The TAMARA21 furniture foot is offered in unfinished maple wood...

This furniture leg is small, but strong and height adjustable. Can be used for both closet & furniture leg applications. The 55410ST-SNGL is 4" tall, 1-3/16" in diameter with a welded mounting...

Our 4-1/2" tall horn contemporary furniture leg is a brilliant addition for your house, office or kitchen cabinets. The leg mounts by screwing through the mounting flange on top of the leg. Height:...