Accessories

Glass standoffs or spacers can be used on glass with a maximum thickness of 3/8" (10mm). Drillng through the glass is required. Also called shelf spacers, these standoffs are good for reception desks, counters, and display shelves in cabinets. Heights:...

Attach a cable guard to your table top to organize your work space and safely hide your wires. Just slip the wires down the middle of the Vertebrae.  Designed for 30" high desks, however can be shortened as needed. Kit consists of 1 top mounting...

The bar console leg allows you to extend your counter tops by 9". Attractive, yet practical solution marries space efficiency with elegant design. It can be used in concert with many of our glass top table legs and glass accessories. Comes with bolts for...

The BR-15 is perfect for use on most rectangular, square or round table tops.  The bar shelf riser folding legs allow for ideal presentation of hospitality service applications. PLEASE BE SURE TO ALLOW 2 WEEK LEAD TIME FOR FABRICATION Height: 15"...

Just like our straight bar console post, but angled at 30 degrees. This bar console leg allows you to extend your counter tops by 9". The angled console offers space efficiency and elegant design. For secure installation, it comes with bolts for...

19-1/2" diameter chrome polished foot ring. This beautiful, easy to install foot ring is intended for our PX series pedestal bases. It literally slides down the column and then you twist it to lock it in place! This means YOU get to decide where it's...

Designed for our Stainless Steel metal table bases with 3" column diameters. The ring is 15-3/5" overall in diameter - with a 3/4" tube diameter. Perfect for bar applications as well counter supports. Attached at the factory with countersunk screws -...

Vault-400 Stainless Steel Foot ring is designed for 3" column diameters. It "vaults" up the column 9-3/4" and sports a 15-3/5" overall diameter. The tubing is 3/5" diameter. Perfect for bar applications as well counter supports. Attached at the...

Cast iron Foot ring is designed for 3"  column diameters for the following cast iron table bases: 9550 9600 It slides onto the base column. Intended for bar height bases. Height: 9-3/4" Finish: Black matte Material: Steel Tube diameter: 1"...

Designed specifically to work with the following cast iron table bases, our cast iron foot ring can also be used with most other 3" column table bases: 9550 9600 9610 RADIANT25 SUN35 It slides onto the base column. Intended for bar height bases...

Designed for use with all table bases using a 1/4"-20 thread size, these levelers automatically adjust up to 5/16" with it's hydraulic mechanism, which keeps all contact points touching the floor. Providing a swivel feature for increased stability,...

The Cast Iron Accessory Hook allows for safer hanging and more secure purse, pokectbook or handbag storage in any restaurant, bistro or bar setting. This add-on feature provides more security for your laptop bag or backpack than blindly hanging it...

This caster allows for easy mobility while having a stylish look. The high quality and very stylish caster features a locking mechanism and a large wheel for easy movement. This leg is easy to install, stylish looking and rolls great. Ideal for use on...

Our A3000 is a M10 threaded insert for levelers. Size: M10 Material: Steel Length: 5/8" Outer diameter: 3/4" Inner diameter: 5/8" Sold as single

This is a steel threaded M10 leveler with a nylon base. Height: 1-5/8" (41mm) Foot diameter: 1-5/16" (34mm) Thread type: M10 - 1.5mm Thread length: 1-1/4" (31mm) Thread material: Steel Foot material: Nylon (Plastic) Foot color: Black Finish:...

Our A4100 is a M8 fastening T-Nut. Size: M8 Material: Steel Length: 7/16" Outer diameter: 7/8" Inner diameter: 7/16" Sold as singles

Our T516 is a 5-1/16" fastening T-Nut. Size: 5/16" Material: Steel Length: 7/16" Outer diameter: 7/8" Inner diameter: 5/16" Sold as single

Our T1420 is a 1/4" x 20 fastening T-Nut. Size: 1/4" x 20 Material: Steel Length: 5/16" Outer diameter: 3/4" Sold as single

Our A3100 is a M10 fastening T-Nut. Size: M10 Material: Steel Length: 7/16" Outer diameter: 1" Inner diameter: 1/2" Sold as single

Specifically designed to conceal the floor mounting plates of our 2-3/8" diameter bolt down legs, the 304 grade stainless steel cover plates will give a sharp, crisp, decorative appeal to an otherwise industrial application. With a 7" overall diameter,...